Hello from the Test Drive MeshCore500 Node e348 at TWTXmesh https://thewoodlandsmesh.net/e348
MeshCore500 is the FCC Compliant MeshCore Network for The Woodlands Mesh Project at TWTXmesh.org
MeshCore Communities nationwide are becoming FCC compliant with new preset configurations to accommodate bandwidth 500 kHz (under United States FCC regulation 47 CFR 15.247, digital modulation systems operating in the unlicensed 902–928 MHz ISM band must maintain a minimum 6 dB bandwidth of at least 500 kHz). Learn more at MeshCore500.org.
TWTXmesh.org MeshCore500 Presets: TWTX MeshCore 500
PROFILE 1: FCC compliant (link)
The frequency preset currently set as primary in profile 1 is in beta.
NOTE: Profile 2 (link) is old default presets (non-FCC compliant)
| Frequency | see TWTXmesh presets (link) |
|---|---|
| Bandwidth | 500 kHz |
| Spreading factor | see TWTXmesh presets (link) |
| Coding rate | see TWTXmesh presets (link) |
| Prefix | 2-Byte (Required) |
Log my test at: Ping-Back
Pocket Node: SKU#00101 – XIAO Wio Pre-configured Test-Drive Promo Kit – Direct Power (no battery required) – Requires Bluetooth pairing to phone. Available through TEST DRIVE MESH (iCode required)
Promotional material and equipment use subject to terms & conditions (see details).
Tests Logging: Ping-Back – Thanks for your feed back!
Hello Mesh! I’m test-driving this pocket node at https://thewoodlandsmesh.net/d948
See also Best Practices for Meshtastic Configurations
LABEL: TWTX XXXX TAG: test-drive
Leave a Reply